HUB1
START SYSTEM
Omnie 'O' -> Cogs -> General Params -> System Set Up -> System Start -> POP UP: YesTOP TIP: The Control Hub will now communicate with the Wiring Centre, the red LED will stop flashing and some green LED's along the A rail will turn on
HUB2
START SYSTEM
Omnie 'O' -> Cogs -> Install Params -> System Set Up -> System Start -> POP UP: YesTOP TIP: The Control Hub will now communicate with the Wiring Centre, the red LED will stop flashing and some green LED's along the A rail will turn on
NOTICE: You should always stop the system before making changes to the Control Hub's background process like: changing sensors serial numbers or changing Wiring Centre settings. You can leave the system on to change all user settings
Comments
0 comments
Article is closed for comments.