HUB1
STOP SYSTEM
Omnie 'O' -> Cogs -> General Params -> System Set Up -> System Stop -> POP UP: YesTOP TIP: Once the system is stopped the Wiring Centre red LED will be flashing 3 short flashes
HUB2
STOP SYSTEM
Omnie 'O' -> Cogs -> Install Params -> System Set Up -> System Stop -> POP UP: YesTOP TIP: Once the system is stopped the Wiring Centre red LED will be flashing 3 short flashes
NOTICE: You should always stop the system before making changes to the Control Hub's background process like: changing sensors serial numbers or changing Wiring Centre settings. You can leave the system on to change all user settings
Comments
0 comments
Article is closed for comments.